Archive for July 2014
Motion control is pretty complicated.
There’s been something really bothering me about the “integrated” motion control you find in PLCs these days (notably Allen-Bradley ControlLogix and Beckhoff TwinCAT). Don’t get me wrong, they’re certainly integrated far better than stand-alone motion controllers. Still, it just doesn’t “feel” right when you’re programming motion control from ladder logic.
When I’m programming a cylinder motion in ladder logic, I would typically use a five-rung logic block for each motion (extend/retract). One of the 5 bits is a “command” bit. This is a bit that means “do such-and-such motion now”. Importantly, if I turn that bit off, it means “stop now!” This works well for a cylinder with a valve controlling it because when I turn off power to that valve, the cylinder will stop trying to move. It would be nice if integrated motion was this simple.
It’s interesting to note that manual moves (a.k.a. “jogging”) are usually this simple. You drop a function block on a rung, give it a speed and direction, and when you execute it based on a push-button, the axis jogs in that direction, and when the push-button turns off, it stops jogging. Unfortunately none of the other features are that simple.
All other moves start motion with one function block and require you to stop it with another. The reason it works like this is because motion controllers also support blended moves. That is, I can first start a move to position (5,3) and after it’s moving there I can queue a second move to position (10,1) and it will guide the axes through a curved geometry that takes it arbitrarily close to my first point (based on parameters I give it) and then continue on to the second point without stopping. In fact you can program arbitrarily complex paths and the motion controller will perform them flawlessly. Unfortunately this means that 90% of the motion control logic out there is much more complex than it needs to be.
Aside: in object-oriented programming, such as in Java or .NET, it’s pretty normal to have to interface with a relational database such as MySQL or Microsoft SQL Server. However, when you try to mesh the two worlds of object-oriented programming and relational databases, you typically run into insidious little problems. Programmers call this the Object-relational impedance mismatch. I’m sure that if you added it up, literally billions of dollars have been spent trying to overcome these issues.
My point is that there is a similar Ladder logic-motion control impedance mismatch. The vast majority of PLC-based motion control is simple point-to-point motion. In that case, the ideal interface from ladder would be a single instance of a “go-to” function block with the following parameters:
- Target Position (X, Y…)
- Max Velocity
- Acceleration Jerk
- Deceleration Jerk
When the rung-in-condition goes true on this block, the motion control system moves to the target position with the given parameters, and when the rung-in-condition goes false, it stops. Furthermore, we should be able to change any of those parameters in real-time, and the motion controller should do its best to adjust the trajectory and dynamics to keep up. That would be all you need for most applications.
The remaining applications are cases where you need more complex geometries. Typically this is with multi-axis systems where you want to move through a series of intermediate points without stopping, or you want to follow a curved path through 2D or 3D-space. In my opinion, the ideal solution would be a combination of a path editor (where you use an editing tool to define a path, and it’s stored in an array of structures in the PLC) and a “follow path” function block with the following parameters:
- Path Tolerance
When the rung-in-condition is true, it moves forward along that path, and when it turns off, it stops. You could even add a BOOL parameter called Reverse which makes it go backwards along the path. The second parameter, “Path Tolerance” would limit how far off the path it can be before you get a motion error. I think this parameter is a good idea because it (a) allows you to initiate the instruction as long as your position is anywhere along that path, and (b) makes sure you’re not going to initiate some wild move as it tries to get to the first point.
A neat additional function block would be a way to calculate the nearest point on a path from a given position, so you could recover by jogging onto a path and continue on the path after a fault.
Obviously there needs to be a way for the PLC to generate or edit paths dynamically, but that’s hardly a big deal.
Anyway, these are my ideas. For now we’re stuck with this clunky way of writing motion control logic. Hopefully someone’s listening to us poor saps in the trenches! 🙂
Happy Canada Day!
Some of you may wonder if I’d fallen off the face of the Earth, but the truth is life just gets busy from time to time. Just for interest’s sake, here’s my latest fun project: an Arduino UNO running ladder logic!
You may remember I wrote a ladder logic editor about 5 or so years ago called SoapBox Snap. It only had the ability to run the ladder logic in a “soft” runtime (on the PC itself). This is an upgrade for SoapBox Snap so that it can download the ladder logic to an Arduino and even do online debugging and force I/O:
I haven’t released the new version yet, but it’s very close (like a few days away probably).
Edit: I’ve now released it and here is a complete tutorial on programming an Arduino in Ladder Logic using SoapBox Snap.